VOLTRONIC ® E20 Engine Flush is advanced internal engine cleaner. Formulated with extremely low-ash material, comply to EURO-VI norm. Remove harmful deposit such as carbon deposit on piston and piston ring crapper, oil sludge, dirt aggregate and breakdown particles. With corrosion inhibitor for neutralizing acidity in the engine. Improve engine performance by restoring engine compression up to 99%. Does not contain aggresive cleaning material, friendly to seal material such as silicone, NBR, SNBR, AEM, ACM and FKM.
Features
Remove harmful deposit such as carbon deposit on piston and piston ring crapper where caused of premature wear.
Improve engine performance, restore engine compression up to 99%, restore power, restore fuel economy and reduce emission.
Remove oil sludge, dirt aggregate and breakdown particles
prevent engine from premature wear, prolong engine life.
Proven ground test 200,000 km mileage after facing oil sludge problem
Does not contain aggresive cleaning material, friendly to seal material such as silicone, NBR, SNBR, AEM, ACM and FKM.
Formulated with corrosion inhibitor for neutralizing acidity.
Clean hydraulic tappet, reduce tappet noise.
Application
Gasoline, diesel, CNG and hybrid engine, both with turbocharged or without. Usage direction
1 bottle (250/300 ml) treat up to 5 litres motor oil. Fill into engine oil prior oil change interval. Run engine and give throttle intermittently for approx. 20 minutes. Drain, replace the motor oil and oil filter.
.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
